Smoke Leak Detector: SmokElite SE505 EVAP

(No reviews yet) Write a Review
Was: $409.00
Now: $399.00
SKU:
SmokElite SE505 EVAP
Availability:
one week
Weight:
206.00 Ounces
Shipping:
Calculated at Checkout

Product Overview

The SE505 Smoke leak locator is specially designed to locate the leaks of EVAP system and other systems working in low pressure. Its build-in micro air compressor and pressure regulator, output 0.75 PSI air. SE505 comes with a small-range pressure gauge and flow meter, which can detect leaks as tiny as 0.010” in any sealed system, helping you pinpoint leaks fast by manipulating the smoke output. The smoke vapour may find the leaks in many sealed systems such as Vacuum, Oil, Turbos and Intercoolers, Manifolds, Brake Boosters, EGR Valves, Seals, Gaskets, Brake Vacuum Hoses, Cooling Systems, Wind and Water Leaks, Diaphragms, Central Locking Systems and much more.

Features:

  • Onboard Micro Air Compressor: Allows for full portability around the workshop or in remote locations. 
  • Variable Flow Control: Detect the leaks as tiny as 0.01” in any sealed systems, helping you pinpoint the leaks fast by manipulating the smoke output. 
  • Pressure Decay Test: Improves the accuracy of repairs and eliminates the comebacks by verifying that leaks are repaired completely at the first time. 
  • Smart Smoke / Air Mode Design: 5-Minutes smoking and Air Mode in cycle. Air mode is to detect whether there are leaks; Smoking mode is designed to locate where leaks are.
  • Instant Smoke Generation: Smoke output flow rate up to 10L/minute. 
  • Visual Monitoring: Have a clear idea about the pressure status, flow status, and fluid level. No more guesswork. 
  • Safety guaranteed: Low pressure stabilizer inside makes sure no any harm or damage to EVAP system components. 
  • Various Fittings: Come up with everything you need to get job done. Super long 3 meter smoke outlet hose advantage for heavy duty trucks. 
  • Simple to operate: Save time and make you money. 
  • Compact Lightweight Design: At 5.5 Kg, SmokElite is ultra-portable and let the technician to go where the work is. Perfect for mobile repairs, field service and fleet repairs.

Accessories:

  • Hook: to hang diagnostic leak detector under hood or chassis
  • Smoke producing fluid
  • Evap service took kit:
    • Schrader valve removal tool
    • EVAP service port adaptor (SE507 Turbo model is not equipped)
  • Cap plug kit: Seals a variety of openings in order to pressurize system for testing
  • Standard Cone Adaptor: To introduce smoke into exhaust and induction systems
  • Battery cable: To connect the battery and locator
  • Smoke Outlet hose: To introduce the smoke from locator to object system
  • Air Intake Adaptor: Inflatable block off bladder with a smoke pass-through
  • Accessory Storage Case & User Manual

Facts & Parameters:

 

Model

Product Model

SE505

SE507

SE509

Diagnostic Mode

EVAP 

TURBO 

Dual  ( EVAP & TURBO)

Shipping - Weight   

5.8KG

5.8KG

6.2KG

Shipping - Dimensions

350*300*290mm

350*300*290mm

350*300*290mm

Power Supply   

DC 12V

DC 12V

DC 12V

Pressure Supply

Built-In Air Pump

Built-In Air Pump

Built-In Air Pump

Output Pressure TURBO Mode

N/A

3- 20 PSI (0.2- 1.38 BAR )

3- 20 PSI (0.2- 1.38 BAR )

Output Pressure EVAP Mode

0.75 PSI / 0.05 BAR

N/A

0.75 PSI / 0.05 BAR

Operating Temperature

0 °F to 140°F (-17°C to 60°C )

Generator Temperature Protection

239 °F (115°C)

Operating Humidity

No Restrictions

Operating Altitude

No Restrictions

Vapor Output Hose

10 ft. (3 m)

Operating Modes

Smoke 5 minute Cycle / Air Cycle

Smoke producing fluid

Baby oil / Mineral oil

Housing Material

Steel / Aluminum

Warranty

1  Year

 

The Knowledge You Should Know Before You Buy A Smoke Leak Detector / Locator

What Is Smoke Leak Diagnostic? Leaks can present troubles for a vehicle, but not all leaks are fluid leaks. Most of leaks can be gas or air leaks. Unmeasured air flow through your engine throws off the fuel to air ratio. It leads to poor engine performance, for example, increase in fuel consumption, lack of power, noise, shaking… 

To prevent further damages, it is important to run a smoke leak test on your car to ensure that it is safe to drive with no dangerous leaks. The Smoke Leak Locator is a valuable tool for mechanics, because it helps identify issues and will help prevent any other serious damages happening through neglect. It is common for the Check Engine light to illuminate when the car is started and to remain on, indicating that a problem exists. If you’re uncertain of a leak occurring in your car, get it checked out today to prevent future damage. 

What is EVAP and TURBO? 

EVAP system (Evaporation Emission Control System) usually works in the low pressure from -3.5Kpa to 3.5Kpa (-0.5psi~0.5psi), and never over the 30Kpa (4.35psi). In EAVAP system very small leaks even 0.01 inch will cause of Engine Check Light on. You must repair the leaks for the engine to work well.

The other systems work in the higher pressure from 3~20psi, so we generally called them “TURBO”. The leak test happened to these systems needs variable pressures to get the accurate results.

Top 4 Reasons To Have Smoke Leak locator: 

Diagnostic Scanner only does the half of work: The scanner can only tell the failure or incorrect data of sensors, but won’t tell you why warning light is on and where the problem is. 

Over 60% of DTCs (Diagnostic Trouble Code) are pressure related: Incorrect Air Pressure or Oil Pressure generated 60% of DTCs, and the root causes are leaks. With the Smoke Leak Locator, you can easily find where the leak is and fix it. 

Less Time and Less Work: The smoke leak detector helps the technician to find the problems easily, which can save the technician's time and work. It comes with more happy Customers!

Make Your Shop More Professional And Reliable: Using soap bubble to find a leak is out of date. Smoke Leak Locator makes you look more professional and confident when facing customers. It is worthy of investment!

Application and Guide

Quickly and Accurately test the integrity of:

  • Complete Fuel Vapor Recovery (EVAP) system 
  • Complete Exhaust System (Diesel or Gasoline)
  • Complete Intake System (gasoline, alternative fuel, and diesel)
  • Turbo and Turbo Housings 
  • Charge Air Coolers
  • All Boosted Engines
  • Diesel Particulate Filter DPF system 
  • Diesel Emission System
  • All without dyes or contaminants, so it’s safe for the vehicle, the technician, and the environment.

Leaks

 

 Car

 

 SUV/VAN

 

 Truck

 

 Airplane

 

 Boat

EVAP

   ●

  ●

   ○

     ○

   ●

ORVR

   ●

  ●

   ●

     ○

   ○

VACUMM 

   ●

  ●

   

     ○

   ●

OIL

   ●

  ●

   

     

   ●

EXHAUST

   ●

  ●

   

     ●

   ●

INTAKE

   ●

  ●

   

     ●

   ●

WIND & WATER

   ●

  ●

   ●

     ●

   ●

MANIFOLDS

   ●

  ●

   

     ●

   ●

TURBO CHARGERS

   ●

  ●

   

     ●

   

SENSOR

   ●

  ●

   

     ●

   ●

SEALS & HOSES

   ●

  ●

   

     ●

   ●

REMARK

● Excellent  

 Suitable

○ Not Supported

 

Warranty Information

1 year

Product Videos

Reviews

(No reviews yet) Write a Review